How to cut logs into lumber with a chainsaw

how to cut logs into lumber with a chainsaw

How to Mill a Log Using a Chainsaw: A Guide

First cut the log from the top about 1/3 of the way into the wood. Next cut from the underside (underbuck), ensuring you are only exerting light pressure upwards, till you reach the first cut to avoid the log pinching the chainsaw bar. Underbucking Note: when performing an underbuck the chainsaw will want to push back at you. Apr 05,  · Cut logs into lumber with a chainsaw. Table of Content show A chainsaw mill is an attachment tool for the chainsaw. You have to buy it separately. With this attachment, you can make your chainsaw as a milling machine to cut logs into lumber. This is a portable tool, cheap, and doesn’t require large space. 5/5(12).

Getting a chainsaw and cutting logs are not tough anymore these days. No matter if you are planning to get a gas chainsaw or an electric one, cutting logs can still be difficult for you. So, today, we will tell you how to mill a log with a chainsaw.

Depending on different cutting techniques and different standing posture, we have some easy and common techniques.

If you have placed the log on the ground, you can go for the process of over-bucking if you want to mill the log with a chainsaw. First of all, you have to get your hands on the right chainsaw mill. Now, move your hands on the top part what drugs causes dilated pupils the log.

Here, you have to start cutting. But make sure you are providing light pressure on the chainsaw because if you are forcing it, the cuts will never be perfect. Start cutting slowly. The teeth of the saw will pull the chain bar inside the wood piece. In this process, make sure you do not let the chainsaw of your body touch the ground. Keep the nose along with the chain away from the ground. Also, no toy mechanisms and how they work object should get in touch with the saw chain or nose.

Otherwise, you will see kickback, or the chain will get dull soon. Now, you can easily cut the whole thing without any complications. However, if you see that the guide bar is stuck in the log, you have to be careful.

First of all, turn the chainsaw off and then drive a wedge. Go for any plastic or wooden wedge and get it inside the cut. Get some help from a hammer. The wood will slowly release the chainsaw. Pull it carefully. Now, complete the process. In some situations, you might need to cut logs how to lay a concrete foundation are supported on one end. And as a result, you will need to mix up different chainsaw log milling processes and complete the work.

Keep a distance between the area and your feet. Otherwise, the log will fall on your feet or other body parts and result in unwanted accidents. There are times you need to mill a log that has both ended support. In this situation, you must settle for the cross-cutting technique and mill it with a chainsaw.

In this process, the tool will never get pinched inside the wood and make the process tough for you! In the first place, you how to cut stainless steel sheet at home to start the cross-cutting process just the way you usually do.

Start from the top part of the wood. When you run your saw, you will see that the chainsaw is pushing you back. This is normal with every crosscut. Make sure you are prepared for this force. You have to hold the gear properly and keep the grip firm. Do not pull the chainsaw hard. Otherwise, it will harm your hands or hit your body. When you are going through the process, make sure your feet are free.

Give space to the log pieces to fall freely. Do not injure your feet by blocking the area. Here, you have to switch to the under bucking technique for milling the chainsaw. Start cutting the log from the underside part. Now, take the second cut upward, and at a point, you will meet the first cut. Once you are close to the first cut, automatically, the log weight will affect.

As a how to update kaspersky antivirus 2012 without internet, the wood will split into two parts without your effort.

This will help you cut less and get more benefits. The log will eventually divide into halves and fall downward. At times, you might need to cut logs on the hills too! This is a rare case, but you might get confused about milling the log with a chainsaw if you get yourself into this situation. In this situation, you have to certify that you are standing on the upside. In this position, you can easily cut the log without injuring your body. Because there is a change of the log or the branch rolling downwards and hurting you.

Keeping your body in such a position, you can go for any process you log for milling the log with the chainsaw! So, we have already mentioned how to mill a log with a chainsaw. If you have a chainsaw, get ready with it and do DIY projects without any help!

Ensure that you are wearing all safety gear before you start the process. Have you ever used a chainsaw for milling logs?

How do you do it? Join us on Facebook to discuss it! As an Amazon Associate I earn from qualifying purchases. Take a look at the methods we have mentioned here! Before you Mill a Log: Do not start the milling process in a crowded area. Clear the place for the cutting process along with the fallen log pieces.

Keep all the necessary gear close to you. Wear all safety equipment for hands, eyes, feet, and the body before you start sawing. When you want to learn how to mill a log with a chainsaw, the right posture lets the upper part of the body support the saw and never be fatigued. Keep the feet away from the shoulder line while standing.

Methods of Milling a Log with Chainsaw Method A: Log Overbucking If you have placed the log on the ground, you can go for the process of over-bucking if you want to mill the log with a chainsaw. Step 1: Holding It Perfect First of all, you have to get your hands on the right chainsaw mill.

Step 3: Milling the Log Now, you can how to cut logs into lumber with a chainsaw cut the whole thing without any complications. First, you have to go for the under-bucking technique. This is easier than any other technique for milling logs.

In this way, you will not get your blade pinches. To make sure the blade works without getting stuck, change the position, and start from the top. After cutting a bit, the log will fall automatically as the weight will pressurize the log to fall.

You cannot keep your feet or other body parts on the area where the log will fall while doing this. Step 1: Starting from the Top In the first place, you have to start the cross-cutting process just the way you usually do. Step 2: Changing the Position When you run your saw, you will see that the chainsaw is pushing you back.

Step 3: Dividing the Log Here, you have to switch to the under bucking technique for milling the chainsaw. Method D: Logs on the Hills At times, you might need to cut logs on the hills too! Pro Tips on Log Milling with a Chainsaw Always mill the branches first Never start the saw when you are pinched halfway. Keep the required distance between the feet and the log falling area.

When on the hills, stand on the up-hill position Keep the nose and chain away from the ground. Like this: Like Loading Our location:. Sorry, your blog cannot share posts by email.

Recent Posts

Aug 04,  · Get a good long bladed chainsaw that is also powerful. Work with logs raising a bit higher than the ground, don’t cut in soil. Don’t go for angles while making cuts. Use cut vertical for avoiding messy results. Here’s our essential guide to cutting logs using a chainsaw, saving time, and making your life easier. Let’s cut right to it. 1. the trunk, you’ll likely need to cut it down further, so that it fits your fire. Even if the fit isn’t a concern, cutting the wood into smaller pieces . Oct 29,  · Here, you have to switch to the under bucking technique for milling the chainsaw. Start cutting the log from the underside part. Now, take the second cut upward, and at a point, you will meet the first cut. Once you are close to the first cut, automatically, the log weight will affect.

Why not consider using your own chainsaw? Plus, sawing your own firewood is much more rewarding than buying ready-made. Your first decision is the chainsaw itself. Gas-powered or electric?

The right option for you will come down to a few factors, including:. As a general rule, electric chainsaws are sufficient for most. The only caveat is that they need a power source — no good if your wood is still out in the forest! If you need more pointers, check out our reviews of the top chainsaws on the market right now, including both gas-powered and electric options. But before you get to work, you should divide the trunk into parts, by physically marking meter-long sections.

A word of warning, be careful not to cut into the ground when using this method. You can make your own DIY support, by cutting a V-shaped groove from a large piece of trunk. Just stabilize the support and place the trunk within the groove, then cut through the pre-marked points with a slow running chain. To do this, secure the wood horizontally, then saw through the entire length. We suggest doing this to roughly a 10cm depth, then prising the rest apart with the help of a splitting wedge.

Here are 3 top maintenance tips after using a chainsaw:. Itching to get started? Then visit our blog and find out the absolute best small chainsaw for the homeowner.

So, do you have any suggestions? Your email address will not be published. Your Website. Save my name, email, and website in this browser for the next time I comment. Notify me of follow-up comments by email. Notify me of new posts by email. Fed up with spending money on ready-made logs for your fire? Share this post Tweet. Author: Dean. One Comment Robert says: July 9, at pm. Leave a Reply Cancel Your email address will not be published. Privacy Policy Contact Sitemap. Amazon Associates Disclosure chainsawgeek.

Amazon and the Amazon logo are trademarks of Amazon. All Rights Reserved.

How to cut logs into lumber with a chainsaw: 0 comments

Add a comment

Your email will not be published. Required fields are marked *